Fag bearings taper fag bearings
tapers fag bearings taper bearings fag tapered bearing fag tapered roller
fag taper roller bearing fag cones fag cups fag tapered sets fag bearings metric sets fag precision bearings fag thrust
bearing fag thrust roller bearing fag abec 7 fag metric bearings fag double row bearings fag deep groove ball
bearings fag spherical fag spherical ball bearings fag angular contact fag angular contact ball bearings fag radial
ball bearings fag ball bearings fag inch series fag cartridge bearings fag tapered bearings fag 6200 fag 6300
bearings FAG Bearing Company FAG Company tapers taper bearings
tapered bearing taper roller bearings idler bearings tapered roller bearings cones
cups tapered sets metric sets metric tapered sets precision tapered
assemblies tapered assemblies thrust bearings roller bearings roller
thrust bearing thrust roller bearing precision bearings class 3 class 3
bearings class 0 class 0 bearings class 00 class 00 bearings
Fag angular contact bearings have one ring shoulder partially or totally
removed. This allows a larger
ball complement than found in comparable deep groove bearings, hence a greater load capacity.
Speed capability is also greater.
Fag angular contact bearings are assembled to a contact angle by varying the
Spindle size Barden angular contact bearings have nominal contact angles of either 15° or 25°.
The smaller angle delivers better radial capacity and rigidity, the larger angle is better for axial rigidity.
Separable and nonseparable types are available. In a separable bearing (B
type), the cage holds the balls in place
so that the outer ring assembly (with cage and balls) can be separated from the inner ring. Separable fag bearings
are useful where bearings must be installed in blind holes or where press fits are required, both on the shaft and in
the housing. The separable feature also permits dynamic balancing of a rotating component with inner ring mounted
in place, apart from the outer ring and housing.
Fag angular contact bearings support thrust loads or combinations of radial
and thrust loading.
Fag bearings cannot accept radial loads only --a thrust load of sufficient magnitude must be present.
An individual angular contact bearing can be thrust-loaded in only one direction; this load may be
a working load or a preload.